Raise3D E3
Suitable and expandable for elastic materials and technical applications.
The Raise3D E3 IDEX printer delivers precise, stable and fast prints at speeds of up to 200 mm/s for composites and TPU. This makes it perfect for prototype development and the production of end-use parts. The E3 was developed for a wide range of production requirements and has an additional feeder for flexible filament and a print head for composite materials.
Push the boundaries of manufacturing with the Raise3D E3: Reliably print elastic materials, technically high-quality components or expand the range of materials according to your needs with the Open Material Program.
Opt for the E3 to:
- Increase your production
- Reliably print flexible filaments
- Print end-use parts with an excellent surface finish
Technical specifications
Technical specifications of the Raise3D E3 3D printer
View specifications
| 3D printer | Raise3D E3 |
|
|---|---|---|
| Technology | FFF | |
| Production volume (W x D x H) | Single extruder: 330 × 240 × 240 mm Dual extruder: 295 × 240 × 240 mm |
|
| Printhead | IDEX Independent Dual Extruders | |
| Filament diameter | 1.75 mm | |
| Volumetric speed | 16 mm³/s | |
| Print head speed | 200 mm/s | |
| Building platform | Flexible double-sided PEI building panel (standard), Flexible steel panel with BuildTak (available) |
|
| Maximum building board temperature | 110°C | |
| Heating bed material | Silicone | |
| Building panel leveling | Mesh leveling with flatness detection | |
| Filament run sensor | Available | |
| Automatic filament change |
No | |
| Surface roughness Ra | < 2 μm (Hyper Speed PLA Pro filament, ironing activated) | |
| Supported materials |
HC: PPA CF/ PPA GF/ ABS CF With the Flexible Filament Feeder: TPE (TPU, TPE-A, TPE-S, TPE foam filaments etc.), Shore (A) hardness between 95A and 80A (e.g. TPU-95A, 90A, 80A) as well as all filaments with Shore (D) hardness. |
|
| Layer thicknesses | The E3 is compatible with 0.2, 0.4, 0.6, 0.8 and 1.0 mm nozzles, and the layer height can vary between 0.1 and 0.5 mm. To achieve stable printing results, we recommend a layer height of between 0.1 and 0.3 mm when using 0.4 mm nozzles. |
|
| Nozzle diameter | 0.4 mm (standard), 0.2/ 0.6/ 0.8/ 1.0 mm (available) | |
| Maximum nozzle temperature | 330°C | |
| Connection options | Wi-Fi, LAN, 2x USB 2.0 | |
| Noise emission (acoustics) | ＜55 dB(A) | |
| Operating ambient temperature | 15-30ºC, 10-90% RH non-condensing | |
| Filters | HEPA filter with activated carbon | |
| Net weight | 33.3 kg | |
| Gross weight | 42 kg | |
| Gross weight (box with pallet) | 49.5 kg |
Electrics
| Power supply | 100-240 V AC, 50/ 60 Hz 230 V @ 2 A |
Software
| Slicing Software | ideaMaker |
| Supported file types | STL/OBJ/3MF/OLTP/STEP/STP/IGES/IGS |
| Supported operating systems | WINDOWS/ macOS/ Linux |
| Machine Code Type | G-Code |
Printer control
| User interface | 7-inch touch screen |
| Restoration in the event of a power failure | Available |
| Motion Controller | Atmel ARM Cortex-M4 120MHz FPU |
| Logic Controller | NXP ARM Cortex-A55 Quad 2 GHz |
| Memory | 2 GB + 16 GB onboard flash |
| Operating system | Embedded Linux |
Flexible Filament Auxiliary Feeder
Faster, more reliable printing of flexible filaments with wider compatibility
Equipped with the Flexible Filament Auxiliary Feeder from , the Raise3D E3-3D printer achieves a high print speed of up to 200 mm/s with flexible filaments – with a higher success rate and extended compatibility across a wider range of hardnesses, including TPU-95A, TPU-90A, TPU-80A and more.
Composite Filament Extruder & Pro Ironing
Developed with performance for composite filaments in mind
With the optional composite filament print head, the E3 supports a wide range of composite filaments, including PET CF, PET GF and PPS CF. It reliably handles complex prints with these filaments and ensures a smooth and consistent printing process. Combined with the E3’s Pro ironing function and the latest Hyper Speed PLA Pro filament, you can create highly accurate parts with excellent surface finish.
Efficient and stable production
The E3 from Raise3D is equipped with two filament compartments with desiccant, filament leakage sensors and a power failure recovery function. These safety features guarantee uninterrupted and long-lasting prints. Thanks to its exceptional printing precision, the E3 meets the technical requirements for both functional prototypes and end-use parts. With print speeds of up to 200 mm/s and IDEX functions for duplication and mirror mode, the E3 enables fast series production. This ensures a seamless transition from research and development to series production.
- Outstanding precision and stability
- 200 mm/s print speed, with IDEX and multiple print modes
- Material storage compartments with desiccant
- Filament run-out sensors and power failure recovery
Convenient printing experience for more creativity
The E3 is equipped with automatic bed leveling, which significantly reduces print preparation time while ensuring highly accurate prints. With 9-point leveling, the E3 supports substrate printing*, which allows users to print on a flat substrate, opening up new creative possibilities.
- Automatic bed leveling
- Substrate pressure
*Substrate printing is compatible with selected filaments and substrate types.
The most important features of the Raise3D E3
Raise3D Filaments
Find the Raise3D filaments for your 3D printer here.
Raise3D spare parts & accessories
Find 3D printer spare parts and accessories for your Raise3D printers.
