Formlabs Form Wash L and Cure L
Reliably perfect post-processing of SLA components
With the Formlabs Form Wash L and Form Cure L, you can optimize your workflow from your SLA 3D printers. Designed for high batches and large components, you can achieve clean, high-quality and precise parts efficiently and consistently.
Order Form Wash L V2 Order Form Cure L V2
Large capacity
Optimized for Formlabs Resins
Compatible with all Formlabs SLA 3D printers
SLA 3D printing workflow
All parts from SLA 3D printers need to be washed to remove resin residue and most benefit from post-curing to achieve maximum material properties.
Optimize your SLA 3D printing process with the large-format Form Wash L and Form Cure L post-processing machines. This is because they automate the post-processing of large components or large batches. This makes work processes significantly more efficient.
1. 3D printing
Print your parts with a Formlabs SLA 3D printer.
2. washing
For an even, automatic rinse, insert one large or two small building platforms directly into Form Wash L.
3. post-curing
Then post-cure the parts in the Form Cure L to optimize the material properties and achieve high dimensional accuracy.
4. finish
After removing any support structures, the parts are ready for use.
Rework large SLA parts from the Form 4L quickly, cleanly and automatically while you continue your work.
Form Wash L V2
The Form Wash L V2 agitates the solvent and the components are rinsed. This removes the resin residue from the SLA parts. This gives you a smooth, clean and high-quality component every time. Once the washing process is complete, the parts are automatically lifted out of the solvent and can air dry.
Order Form Wash LStart and concentrate on other things again
As soon as you have started the machine, the entire cleaning process runs automatically. You can get back to other things. Simply use the pre-programmed wash settings for the washing process. If you have special requirements, you can also save your own settings and profiles. This way you always achieve the most efficient cleaning according to your needs.
Integrated solvent monitor
The integrated solvent monitor and cycle counter help you to maintain optimum cleaning performance. By alerting you when it is time to replace the solvent, you do not have to check it yourself.
Adjustable platform holder for Form 4 and Form 4L
Switch smoothly between construction platforms thanks to adaptive platform holders that can be adjusted to different heights and widths.
While you can get on with other work, the printed parts are cleaned in IPA or TPM so that every printed part is perfectly clean.
Form Cure L V2
Form Cure L V2 ensures the optimum mechanical properties and dimensional accuracy of your printed components. To achieve this, the Form Cure L V2 uses heat, UV light and uniform, universal exposure.
Order Form Cure L V2Optimized for the use of Formlabs materials
Use the pre-programmed curing settings for the Formlabs materials. If you have special requirements, you can also save your own frequently used profiles. This allows you to optimize the efficiency of post-processing according to your needs.
Fast and intensive curing
The Form Cure L combines precise heat and 405nm light with validated presets for the 45+ Formlabs materials. Standard resins cure in just 60 seconds, and most engineering resins in under 15 minutes. In addition, preheating to 60 °C takes only 150 seconds.
Temperature
100°C
Heating
2 x 450W
Uniform overall exposure
The interior of the Form Cure L is equipped with a reflective surface and a rotating glass table. This allows the UV light to reach all surfaces of the components and enables even curing.
As soon as the chamber is heated, 96 multi-directional LEDs simultaneously provide optimum exposure, giving the printed parts their maximum mechanical properties in record time.
Validated for biocompatible applications
The Formlabs Form Wash L V2 and Form Cure L V2 have been validated in FDA-approved workflows and are compatible with biocompatible, sterilizable materials manufactured in Formlabs ISO 13485 certified facilities.
A comprehensive ecosystem for the production of large parts or large quantities
Expand internal production with the Formlabs Form 4L or Form 4BL ecosystems. Produce large parts or increase throughput in combination with the Wash L V2 and Cure L V2. From setting up your print to post-processing your part, the Formlabs product suite streamlines the 3D printing workflow.
Discover Form 4L Discover Form 4BLForm Wash L V2 and Form Cure L V2
Save time, minimize effort and maximize efficiency with Formlabs’ automated, large-format post-processing machines.
The Formlabs Form Wash L V2 and Cure L V2 are compatible with all build platforms of Formlabs SLA 3D printers. They are therefore also suitable for use with multiple machines.
Formlabs Form 4L
Form 4/4L Materials
Form Wash L V2
Form Cure L V2
