Formfutura EasyFil PLA Filament
Formfutura EasyFil PLA filament in the o.75 kg spool
The Formfutura EasyFil PLA filament is a very easy to print PLA filament. EasyFil PLA is a high-quality, slightly modified PLA – for a little less stiffness, but a little more impact resistance.
| manufacturer | Formfutura |
| Coil size | o,75 kg |
| diameter | 1.75 mm |
Product details
Formfutura EasyFil PLA filament 0.75 kg
Included in the scope of delivery
- 1 spool of Formfutura EasyFil PLA filament 0.75 kg
Formfutura EasyFil PLA Filament
The Formfutura EasyFil PLA filament is an easy-to-print PLA filament (polylactic acid filament). This EasyFil PLA is a high-quality, slightly modified PLA. It is therefore slightly less stiff and slightly more impact-resistant than filaments made from pure PLA. It can be processed very easily using the FFF / FDM process – without any warping and the adhesion between the layers is also very good.
Properties
- Distortion-free printing and no deformation after cooling
- Good adhesion of the first layer even on unheated printing beds
- Slightly softer than standard PLA, for higher impact resistance
- Virtually odorless processing
- (Industrially) biodegradable
More information
This filament complies with the guidelines and regulations listed below.
RoHS Directive 2011/65/EC*
REACH Regulation 1907/2006/EC*
Accordingly, no unpleasant odors arise during printing.
This filament is also RoHS-certified, REACH-compliant and FDA-approved (food-safe).
*This declaration of conformity with directives and regulations is based on our current knowledge and may be amended in the event of new findings and applies only to the products described above.
Printing recommendations
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 100% |
| Print temp: ± 200 – 230° C | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 0 – 60° C | Fan speed: 50-100% | Experience level: Beginner |
Specifications
