Nylon PA6 C4 filament
140.00 CHF exkl. MwSt.
Out of stock
Nylon PA6 C4 filament
Create durable, impact-resistant prototypes with nylon PA6 C4 filament. It contains 1 spool of nylon PA6 C4 filament weighing 1 kg. The filament is an industrial compound based on polyamide 6 with the addition of 20 % micro-carbon fibers.
Product details
Nylon PA6 C4 filament
Included in the scope of delivery
- 1 spool of nylon PA6 C4 filament 1 kg anthracite
Properties
- Nylon PA6 C4 is a filament based on polyamide 6, a widely used technical material for industrial applications, in automotive engineering and in the electrical industry.
- Thanks to its excellent values and the possibility of using additives such as glass fibers, minerals or carbon fibers, the properties can be adapted to the application.
- Mechanical reworking is possible at any time.
- The production of this industrial compound, with the addition of 20% carbon fibers with a fiber length of 6 mm, results in a fiber length of 800-900 µm in the end product.
Printing recommendations
- To print the PA6 C4 filament, we recommend the MakerBot Experimental Extruder.
- A hardened nozzle from 0.4mm – 0.5mm because of the abrasiveness.
- The ideal layer height is between 0.15 – 0.20 mm.
- Apply water-soluble glue stick for adhesion to the building board.
- Store the coil in a DryBox during printing.
The Experimental Extruder is compatible with the
- Makerbot Replicator+
- MakerBot Replicator 5th Generation
- MakerBot Replicator Z18
*The Experimental Extruder, third party materials and print recommendations are experimental products and are not covered by warranty or MakerCare. 3D-EDU GmbH disclaims all liability.
Software
Recommended print modes can be found at MakerBot Labs.
Technical data
| Technical data | Test method | Values |
| Density | DIN EN ISO 1183 | 1.19 |
| Yield stress | DIN EN ISO 527 MPa | 90 |
| Elongation at yield | DIN EN ISO 527 % | 8% |
| Tension E_module | DIN EN ISO 527 | 4200 |
| Shore hardness | DIN EN ISO 868 | n.a. |
| Softening temperature | DIN EN ISO 306B | 215°C |
| Notched impact strength | DIN EN ISO 179/23°C | 12 |
| Burning behavior | UL 94 (1.5mm) UL Registration | HB |
All specifications refer to the base material and not to the items produced by 3D printing.
Specifications
- Filament diameter: 1.75 mm
- Coil diameter: 200 mm
- Coil width: 80 mm
- Coil axle hole: 53 mm
Working environment
Store the filament in a cool, dry place in vacuum packaging. It can absorb moisture from the air and prolonged absorption of moisture can severely impair the quality of the filament and its performance.
